Autoclaved Aerated Concrete (AAC)

Base Coats

 

Sider-Base Concentrate AAC – An AAC light-weight concentrated base-coat only requiring the addition of masonry sand and water at the jobsite. Especially formulated for AAC applications, it is a durable, water repellent yet breathable base-coat. A cost saving coating due to its concentrated formulation, it is ready to accept a finish coat such as Monosideral AAC or Sider-Plast Finish.

Monobase AAC – This light-weight, pre-mixed AAC base-coat packaged pre-sanded, only requiring the addition of water at the jobsite. It is a durable, water repellent yet breathable base-coat ready to accept a finish coat such as Monosideral AAC or Sider-Plast Finish.

Power-Base AAC – Power-Base AAC is a durable polymer-modified interior or exterior leveling coating for use over AAC and specifically designed for AAC Power Panels. Power-Base AAC performs like a protective skin that will not trap moisture. Used as a leveling coating for exterior or interior AAC surfaces, it will not shrink and will allow the application of a finish coat within in 24 hours (depending on ambient conditions.)

Sider TXT-AAC – The ultimate interior base-coat designed for superior abrasion and mechanical resistance. It is a durable base-coat ready to accept a finish coat such as Sider-Gyp AAC or Durastone AAC.

Plaster/Gypsum

 

Sider-Gyp Kote AAC – Our interior one-coat gypsum/plaster AAC coating designed for application directly over Aerated Concrete (AAC) at a thickness of 1/4″ to 3/4″. It can also be textured to achieve a stippled, knock-down or skip-trowel effect.

Sider-Gyp AAC – Our interior AAC wall and ceiling gypsum-plaster coating providing an extremely hard, durable and smooth finish. It can be finished smooth, textured to achieve a stippled, knock-down or skip-trowel effect or covered with paint or wallpaper.

Sider-Veneer AAC – Our ultra-smooth wall and ceiling gypsum-plaster coating that provides an extremely hard, durable and smooth finish formulated to be sanded, achieving an extremely smooth veneer rendering. It can also be textured to achieve a stippled, knock-down or skip-trowel effect or covered with paint or wallpaper.

AAC Thin-Bed Mortars

 

Sider-Thin Bed Mortar AAC – A multi-functional thin-bed bonding mortar that allows additional installation time for the placement of AAC blocks to provide a smooth, uniform surface with extremely strong adherence and mechanical properties.

Sider-Coarse Bed Mortar AAC (Large Grain) – A coarse aggregate thin-bed bonding mortar designed for the placement of AAC panels where a thicker/leveling application of mortar is required. Formulated to render an uniform surface with extremely strong adherence and mechanical properties.

AAC Waterproofing Coatings

 

Sider-Proof AAC – An innovative cement-based, polymer-modified waterproofing coating for use above and below grade, specifically formulated for AAC applications. Packaged in a kit and easy-to-apply, just mix and brush or roll on in two cross coats. It renders a strong, durable yet flexible waterproofing finish.

Sider-Proof HF AAC – Enhancements on our Sider-Proof AAC product to provide superior flexibility (resist cracks up to 1 mm), Sider-Proof HF AAC is excellent for use in above or below grade applications where exceptional flexibility is required. Packaged in a kit, easy to apply and especially formulated for AAC applications, just mix and brush or roll on in two cross coats.

Finish Coats

 

Monosideral AAC – The ultimate AAC integrally-colored, pre-mixed stucco. The beautiful rendering of colored cement-stucco at its finest, integrally colored, designed for AAC and easy-to-use! Monosideral AAC will render an ‘old-world’ modeled look in a variety colors and textures.

Marble-Stone AAC – Marble-Stone AAC is a premixed marble aggregate AAC stucco finish featuring unique properties of water repellency, vapor permeability & weather resistance. A slick traditional finish and rather thin in application, it will render a smooth ‘Old-World’ look or with textures such as a fine skip-trowel.

Marble-Kote AAC – Marble-Kote AAC is a premixed marble aggregate colored stucco product applied in a one-coat application direclty over AAC, featuring unique properties of water repellency, vapor permeability & weather resistance. Marble-Kote AAC provides a smooth or textured colored wall finish as desired.

Sider-Plast Finish – Our acrylic coating, rendering textures such as Swirl, Coarse Sand, Fine Sand… Designed for application over our AAC base-coats to render a smooth and uniform finish.

Durastone AAC – A multi-color AAC wall finish composed of colored beads mixed in a clear polymer binder. Vapor-permeable, Durastone can be used in interior or exterior application. Durastone provides a highly durable, scratch-resistant finish that can be easily repaired if damaged. The vibrant colors provided by Durastone are available in 6 standard tints while color options are available upon request.

Paint

 

Siderite AAC & Siderite-C AAC – These two cement-based paints are the natural choice when a water repellent and vapor permeable paint is required. Especially formulated for AAC applications, Siderite AAC provides a traditional smooth finish while Siderite-C AAC allows for a coarser sand finish appearance.

AAC Repair Mortars

 

Sider-AAC Block & Panel Patch – A thick mortar used to resurface conduit chases and repair damages to blocks and panels, easy to apply and especially formulated for AAC blocks and panels.

Power-Base AAC – Power-Base AAC is a durable polymer-modified interior or exterior leveling coating for use over AAC and specifically designed for AAC Power Panels. Power-Base AAC performs like a protective skin that will not trap moisture. Used as a leveling coating for exterior or interior AAC surfaces, it will not shrink and will allow the application of a finish coat within in 24 hours (depending on ambient conditions.)

AAC Floor Coatings

 

Sider-Level AAC – The next generation of high-strength self-leveling AAC floor panels resurfacing coating. A true self-leveler, it will render a highly durable finish for re-leveling AAC floors. Packaged as a kit, and integrally-colored if desired, with nothing to add & easy to install.

AAC Manufacturers

 

 

 PRODUCTINFO

 

We Ship Our Products Worldwide  Made in the USA.

Copyright 2024 Sider-Crete -User Agreement | Privacy Policy